Home > x360dock, xbox360 modchip > How to use x360dock module2 ?

How to use x360dock module2 ?

What the x360dock module 2 content:

x360dock module1 install:

connect the white data cables and the black data cables. There are white words on the mainboard, “TO DRIVE” means conect with the  drive slot, and “USB” means use the soft cables to connect with the dongle

“TO MOTHERBOARD” means contact with the motherboard” right is power and the left is sata.

Attention: be care of the soft cables, make sure it is conected tightness.

module2 install (you can buy the x360dock module1 + module2 wholesale on Game4Deal):

here is a black chip included in the module2. put it on the dongle like the follow picture.

connect the dongle to the controller, like the follow:

How to put software into the sd card:

Download the module2 firmware on the official site: http://www.x360dock.com

use USB Image tool to format the sd card.

open the USB Image tool ,select the drive, and select the second choice.

press “restore”


The follow is the video, please check it:

Thanks for your reading!

  1. February 20, 2013 at 2:26 am

    Many thanks for using some time in order to compose “How to use x360dock module2 ?
    3dsaccessary”. Thank you so much once again ,Florine

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: