Home > E3 flasher > How to install E3 flasher (slim version cup Installation tutorial)

How to install E3 flasher (slim version cup Installation tutorial)

Step1:  install the cup like the follow:

Attention:  make sure the cup is placed in a right direction and right place. wholesale E3 flasher is designed precise and it will fix with the mainboard perfectly.

Step2: make the soft cables to 180 ° bend, use scotch tape to fixed it on the clip.  keep the soft cables flat on the mainboard, use scotch tape to fix it on the mainboard. (attention: don’t let the tape cover the goldern part) Then the clip is installed.

Attention: don’t make the soft board buckling, just like nature:

get the ps3 back

Step1:  put the metal cover back, let the flat cable of soft board out of metal cover.

Step2: put the mainboard back, (attention: make the flat cable through the Hard disk warehouse first before put back the mainboard) screw the 2 black and 2 white screws back. install the antenna

Step3: put back the keyboard plate and the dvd drive. connect the keyboard plate cables first, but don’t make it in the box, you need put the dvd drive back first.

Step4:  dvd drive need connect the cables from bottom, press the connector carefully.

then connect the outside cables

then put back the dvd drive and screw the last screws

The last is put back the keyboard flat

Step5: put back the power and connect the cables

Step6: put back the cover and screw all the screws of bottom (not including hard disk houseware screws)

Advertisements
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: