Home > E3 flasher, PS3 News > How to install E3 flasher? (E3 flasher mainboard installation)

How to install E3 flasher? (E3 flasher mainboard installation)

Here is the E3 flasher mainboard which is put in the metal cover:

Put the E3 flasher wholesale into Hard disk warehouse like the HDD install.

use the left space to put the soft flat cable on the mainboard. use finger to press the flat cable lightly from left to right. if the install is correct, you will hear a sound like snap-in.

Finish the installation:

Put the whole mainboard into the Hard disk warehouse. (Be careful and lightly)

Then put the E3 flasher Vice motherboard on the mainboard. don’t mistake the place.

The last is fixed the Vice motherboard,  tighten the screws.

If the installation is correct, power on, you will see the red LED is light.

PS: In order to ensure the installation is successful, you can test the E3 flasher before make the console back.

Connect the ESATA HDD and put the original HDD back to the case.

Set the Vice motherboard to PS3 MODE,OFW, if you can start normal, congratulations!

Thanks for reading!

Advertisements
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: