Posts Tagged ‘wholesale e3 flasher’

How to install E3 flasher? (E3 flasher mainboard installation)

Here is the E3 flasher mainboard which is put in the metal cover:

Put the E3 flasher wholesale into Hard disk warehouse like the HDD install.

use the left space to put the soft flat cable on the mainboard. use finger to press the flat cable lightly from left to right. if the install is correct, you will hear a sound like snap-in.

Finish the installation:

Put the whole mainboard into the Hard disk warehouse. (Be careful and lightly)

Then put the E3 flasher Vice motherboard on the mainboard. don’t mistake the place.

The last is fixed the Vice motherboard,  tighten the screws.

If the installation is correct, power on, you will see the red LED is light.

PS: In order to ensure the installation is successful, you can test the E3 flasher before make the console back.

Connect the ESATA HDD and put the original HDD back to the case.

Set the Vice motherboard to PS3 MODE,OFW, if you can start normal, congratulations!

Thanks for reading!


How to install E3 flasher (slim version cup Installation tutorial)

Step1:  install the cup like the follow:

Attention:  make sure the cup is placed in a right direction and right place. wholesale E3 flasher is designed precise and it will fix with the mainboard perfectly.

Step2: make the soft cables to 180 ° bend, use scotch tape to fixed it on the clip.  keep the soft cables flat on the mainboard, use scotch tape to fix it on the mainboard. (attention: don’t let the tape cover the goldern part) Then the clip is installed.

Attention: don’t make the soft board buckling, just like nature:

get the ps3 back

Step1:  put the metal cover back, let the flat cable of soft board out of metal cover.

Step2: put the mainboard back, (attention: make the flat cable through the Hard disk warehouse first before put back the mainboard) screw the 2 black and 2 white screws back. install the antenna

Step3: put back the keyboard plate and the dvd drive. connect the keyboard plate cables first, but don’t make it in the box, you need put the dvd drive back first.

Step4:  dvd drive need connect the cables from bottom, press the connector carefully.

then connect the outside cables

then put back the dvd drive and screw the last screws

The last is put back the keyboard flat

Step5: put back the power and connect the cables

Step6: put back the cover and screw all the screws of bottom (not including hard disk houseware screws)